Instructions

Never change the date on any mechanical watch between 9pm and 3am.This is when the mechanism is changing the date. If you desperately need to change the date at that time of day, change the time on your watch to 6:30 first, then set the date, then set the time again.

Note: Unscrew the crown to get to 'normal position'. Screw back in after adjustment/winding.

1.How to set the time

1) Pull out the crown to the second click position.

2) Turn the crown to set hour and minute hands. (Check that AM / PM is set correctly)

3) Push the crown back into the normal position.

 

2.How to set the Date & Time difference

1) Pull out the crown to the first click position.

2) Turn the crown to left for date setting.

3) Push the crown back into the normal position.

 

3.To wind up the mainspring

a) Manual winding (Rotate the crown clockwise at normal position) Fully wound up by turning the crown minimum 55 times. It will start to move naturally after shaking slightly.